CARVIS.KR

Fitting a cat flap can seem intimidating but it's simple with the right instructions. Decide how high you'd like the cat flap (normally, it is at the belly height). Then, mark this area on your door, and use the template provided to help you drill.

If you have a kitten, or a young kitten hold the door slightly open and gradually allow it to go through. Reward it each time it goes through.

Measure the Door

A cat flap allows your pet to move into and out of your home at the time that is convenient for you. This can help with keeping your cat in good health by ensuring that it is getting exercise and also being able to go back door with cat flap fitted in if trapped outside in bad weather, especially in winter. This will reduce the amount of time you spend letting your cat out or in and also make your home safer by letting you know when it has left.

However, it is essential that the flap on your cat is fitted correctly to prevent your pet from escaping through it or be pushed through by any other animals (e.g. dogs). It is crucial to determine the height of your pet's belly as well as the doorway of your house to make sure that the flap is at the proper height. If your cat is longer or taller than the average, you can adjust the flap's height by moving it upwards or downwards by a small amount.

The next step is to make use of a spirit level to mark the center of the door that you will install the flap. Then, using the mark as an indication, cut out the contour of the flap on the door with a Jigsaw. After cutting the flap and sanded the edges to create smooth surfaces. Drill any holes you need to.

Fitting a cat flap step flap should not take longer than two hours. However, the process can be slightly more complicated in the event that you have to put it onto the door of a uPVC or composite door because these doors come in various thicknesses which can affect how the holes are cut and the type of door they are fixed into. We always recommend to contact an expert if this is your first time working with glass.

Measure Your Cat

You can avoid hours of listening to the pet meow to be allowed in or out. This is especially helpful for cats that are inside in all weathers while you work.

If you're planning to put a cat flap in your door, it is essential that you take measurements of your cat prior to attempting the task. It may appear to be a simple task, cat flap but it is essential to get the measurements right. Otherwise, your pet may have difficulty putting it in use.

First, ensure that your cat is calm and not stressed before you take the measurements. You will need to hold them in a manner that they cannot move and also make sure that the ruler or measuring tape is flat against their body, not arching in any places. You can get a precise measurement by keeping the measuring tape or ruler flat against the body of the animal from the top to the bottom.

Once you have the measurement of your cat, it is time to take a look at the door and decide where to put the flap. Place the flap at the level of your cat's belly. This will allow them to pass through the door without much effort. This will also prevent the flap from making a lot noise as it moves back and back.

You must think about the thickness of the uPVC or composite door, as well. Although timber doors are of a similar thickness, uPVC and composite doors may differ in their overall design and this can make the installation of a cat flap in bifold doors flap more complicated as you will need to make sure that the hole you make is the proper size for your pet.

It is also worth studying the instructions included with the kit to find a template drawing that can be used to mark out the location of the hole in the door. This will enable you to determine where the hole should be located and ensure that the template is positioned properly on the door. It is also beneficial to utilize a spirit-level to make sure that the template is placed flush against the door.

Cut the Flap

Before you can put in your cat flap, you'll must cut the door panel to make it large enough for it. This can be a tricky job, and it is recommended to seek the help of a professional cat flap fitter for this job in case you don't have the knowledge or skills to do it yourself. You can also refer to the instructions that come with the kit to learn how to do it right.

You can consider the height of the cat's or kitten's stomach as a guide. As a rule of thumb, place the cat flap approximately 10-15 centimeters above the ground. This is the standard height of the stomach for cats. Your cat will be able to move through the flap with ease and also give the other cats or neighbours who are snooping an issue when trying to get in or out.

Once you have determined the location where the cat flap needs to be placed, mark this position on the door with a pencil. Next, if your kit includes a template for paper, place this over the door and use the marks to drill holes in each corner of the template. Then, you'll be able to cut out the template shape and replace it with the cat flap.

You can put in your cat flap yourself on an uPVC or wood door if you are confident with the use of a jigsaw. Ensure that you do not cut into any of the door mullions or vertical rails. You can use a Jigsaw to cut your panel into a circle or square depending on the way you'd like to cut it. Remember to take your time and don't try to force the jigsaw to cut faster.

Once the hole is cut, carefully fit the flap of cat food into its new home and ensure that it's securely secured. If the flap has screw caps then push them into the protruding bolts. Once the screws are in place, you can sand any rough edges of the cut then apply sealant around any gaps to ensure there aren't any draughts getting into your home.

Place the Flap

If you have a simple cat flap, you can open it and encourage your pet to use it by putting a small amount of cat food on the outside of the door. Alternatively you can try pushing the cat through with your hands or with a stick. Once your cat is comfortable walking through the flap it will be able to come and go as it pleases. This will allow you to let it in and out at any time it's wanted.

You can fit a cat flap into an UPVC or glass door but it's not as simple as fitting one into a timber exterior door due to the fact that UPVC and some glass doors aren't a uniform thickness. This can have a significant impact on the way you cut the hole for the flap and could affect the way your flap will fit properly once it's been installed.

The mounting kit could include a template that shows you the best places to drill holes. If the kit does not include the template you can copy it to create your own. It's important to not use the jigsaw to in order to cut, so it doesn't leave a bigger than necessary hole in your door.

The majority of cat flaps are rectangular or square in shape, however there are some that are circular, and are generally more difficult to place. If you have a round flap, ensure that the hole is in the right place on your door. In the event that it is not, the cat may not be able use it, and might be outside all day (or night).

Some cat flaps have locks that allow you to control the time your cat can enter and leave. This is useful if your pet is afraid of going out in the dark or coming back inside at night. They can also be helpful if you work all day. The lock can be turned on to allow entry or exit, cat Flap and some locks can be locked in both directions, permitting you to close the door completely. This is particularly beneficial for sick or elderly cats who don't want to go out in bad weather.