CARVIS.KR

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they don't rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it very dangerous and potentially fatal. It is crucial to take the time to make sure that you're doing all you can to ensure that your windows are in good shape.

For single pane windows, it is fairly easy to replace them, and the replacement will generally fit within the frame that was previously installed easily. If windows with double panes are held together by internal beading, it is difficult to remove and replace the old panes. In this case you'll need find some plastic spacers to aid the new pane in being able to fit perfectly into the frame of the window.

If you are going attempt to remove the window panes by yourself, it is essential to wear the proper safety gear, including thick gloves and eye protection. It is also recommended to lay down a drop cloth before you begin working on the glass, so that any fragments of glass fall onto the fabric rather than on the floor where they can be trampled on and cause further damage.

Once the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent water and drafts from entering the property until a professional is able to come out and repair the window. It also acts as a barrier to prevent any intruders from making their way into your home. If the gap is large, you may be interested in an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. However, with time, they may be afflicted by a variety of issues like sliding. A window that is sagging can cause problems with light, draughts, and even security. It's crucial to act immediately if you realize that your uPVC windows are sliding.

To repair a window repair near me that is sagging, you can try repositioning the hinges. First, you'll need to unblock the windows to access the frame. Then, you can remove the top and bottom hinges using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you've repositioned your hinges. If you're happy with the fit, tighten the screws to ensure they remain in position.

If you can't reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, leading them to lose their tightness. If this happens, it's essential to replace the seal as soon as you can to ensure that your uPVC windows remain watertight and safe from drafts.

uPVC handles may also become loose. This is typically caused by screws that have been removed over time, but it could be due to the handle mechanism wears out. It's fairly simple to fix a loose uPVC hand. First, you'll need to close the window and do an experiment fitting. The joints at the corners of the sash must align with the joint on the casing. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and then turn the mechanism back into the position it was in.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains, it is important that you take action. The leaks of water from windows do are not just a cause for destruction of your home's structure but also undermine your efforts to control the temperature within your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix and should be undertaken by any competent DIYer. Based on the severity of the problem the caulking used previously may need to be removed before a new layer of caulk can be put on. It is crucial to keep in mind that when it is about uPVC window repairs, do not be tempted to apply too much caulk and then make the area harder to clean and reduce your energy efficiency.

It is important to check that the drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more serious cases, you may need to replace the window.

Mold spots and rotten sills are another sign of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely that the problem is related to the seal, not the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open with a breeze It could be hinges at fault. They can be easily repaired by any skilled DIYer and are usually done within a few minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It is an easy process but it can be easier with someone else to assist in holding the frame in place.

Make sure that the uPVC hinges are open and closed in the proper direction. You can do this by looking for the arrow on each hinge, this indicates the direction in which the window should open.

Faulty window hinges could be the result of incorrectly opening the window a certain way or by poor installation at the factory. Sending us photos through our website can often solve the issue. We are always happy to provide suggestions.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. This is recommended to be done at least every year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by various factors. The hinges can also become disaligned as a result of wear, which can cause gaps where the sash meets frame. This can be easily fixed by giving them a good clean, but when they're beyond repair, it could be necessary to get them aligned or replaced. Secondly the interlock, this is on the hinge side of the window, can also become misaligned, again it is possible to just give them a clean but in some cases it might be necessary to get them replaced.

The second most frequent reason for draughts are the window seals, these can become worn down or damaged over time and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help regulate indoor temperatures, and reduce the risk of draughts.

Lastly, one of the most effective methods to reduce draughts is by using a draught excluder, these are typically made of fabric that are filled with some sort of filler and can be placed on the top of your windowsill. They will help keep cold air out and keep your home warm and cosy!

Your upvc window repair (more info here) windows can keep providing excellent insulation and security to your home with a little regular maintenance and repairs. It is crucial to realize that windows last for a certain period of time and there may come a point where it is more economical to replace them than repair them. If you are experiencing problems with your upvc windows, it is recommended to seek help from a professional immediately.